Super Glider - Easy to print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the final version of my glider model, which is very easy to print. very fun with this toy!
- Ocena
- 4,8 / 5
- Polubienia
- 627
- Pobrania
- 5540
- Wydruki
- 12
- Wyświetlenia
- 23 090
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
the final version of my glider model, which is very easy to print. all it takes is one print, a little editing, and it's ready to fly!
Recommended print parameters:
3 walls
20% infil
Material PET-G
(can use PLA but PLA is brittle so there is a high chance the plane will crack)
Pre-flight instructions:
list of needs:
hair dryer, screw and nut M4
use a hair dryer to adjust the wings as shown in the photo. under the wings with markers so that the wings are V-shaped:
the center of gravity of the aircraft needs to be adjusted for the best result. screw a screw with a diameter of M4 and a length as required into the front hole. according to the photo:
glue the holder in place of the bottom groove for easy throwing
adjust the tail flaps for better flight
enjoy flying!