Ultra slim monitor light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An unobtrusive, touch controlled monitor light based on 3mm led cob strips.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An ultra slim monitor led light bar. It uses 3mm cob ledstrips and a touch sensor to control the brightness.
Additional parts used:
- DC12v 24V 6A Dimmable Sensor Switch (I got the big spring version)
- 40cm of 3mm cob led strip (cut into two 20cm lengths)
- DC 5.5mm connector
- 4 M3.5x16 tapped screws
- Some wire to connect everything
Note; no affiliate links here, just what I bought.
How to print:
Please check the photos for the one with the buildplate. You can see only “lightbar-part1.stl” needs a bit of support. The rest is designed to be printed support-free.
I also did not need a brim, but you could put it on for safety since the parts are pretty narrow and the ends of the lightbar-parts could potentially lift from the bed.
Rest of the print-settings in 1.75 PLA with 0.4 nozzle:
| layer height | 0.2mm |
| walls | 2 |
| top shell layers | 2 |
| bottom shell layers | 2 |
| infill | 15% grid |
