Ultra slim monitor light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An unobtrusive, touch controlled monitor light based on 3mm led cob strips.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An ultra slim monitor led light bar. It uses 3mm cob ledstrips and a touch sensor to control the brightness.
Additional parts used:
- DC12v 24V 6A Dimmable Sensor Switch (I got the big spring version)
- 40cm of 3mm cob led strip (cut into two 20cm lengths)
- DC 5.5mm connector
- 4 M3.5x16 tapped screws
- Some wire to connect everything
Note; no affiliate links here, just what I bought.
How to print:
Please check the photos for the one with the buildplate. You can see only “lightbar-part1.stl” needs a bit of support. The rest is designed to be printed support-free.
I also did not need a brim, but you could put it on for safety since the parts are pretty narrow and the ends of the lightbar-parts could potentially lift from the bed.
Rest of the print-settings in 1.75 PLA with 0.4 nozzle:
| layer height | 0.2mm |
| walls | 2 |
| top shell layers | 2 |
| bottom shell layers | 2 |
| infill | 15% grid |
