Filament Spool Wall Mount/Holder/Rack - VAROE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount with some needed dowels (files for 20-28mm Including 3/4 and 1 Inch pipes) for your 1 kg filament spools.
- Ocena
- 4,939 / 5
- Polubienia
- 950
- Pobrania
- 4874
- Wydruki
- 43
- Wyświetlenia
- 19 245
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model needs to be used with dowels. The holes of the mount are having around 20-28 mm and should fit (wooden) dowels (like in my case). If there are any troubles i've uploaded the cad model for adjustments.
If there are a lot of wished for a certain measurement i can adapt it aswell :)
I recommend it printing with some more infill and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.
My print settings:
Material: Polymaker ABS
Layer height: 0.2mm
Infill ratio: 40%
Wall loops: 4
If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.
2.5kg Spools Version available here.