Filament Spool Wall Mount/Holder/Rack - VAROE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount with some needed dowels (files for 20-28mm Including 3/4 and 1 Inch pipes) for your 1 kg filament spools.
- Rating
- 4.941 / 5
- Likes
- 955
- Downloads
- 4,904
- Makes
- 44
- Views
- 19,318
- Reviews
- 34
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model needs to be used with dowels. The holes of the mount are having around 20-28 mm and should fit (wooden) dowels (like in my case). If there are any troubles i've uploaded the cad model for adjustments.
If there are a lot of wished for a certain measurement i can adapt it aswell :)
I recommend it printing with some more infill and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.
My print settings:
Material: Polymaker ABS
Layer height: 0.2mm
Infill ratio: 40%
Wall loops: 4
If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.
2.5kg Spools Version available here.