1 / 5
K1 With Rapido Hotend Fan Shroud — zdjęcie 1
1 / 5

K1 With Rapido Hotend Fan Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan shroud using stock 4020 blower fan for my K1 rapido hotend mount.

Ocena
0 / 5
Polubienia
25
Pobrania
94
Wydruki
0
Wyświetlenia
1242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Fan shroud using the stock 4020 blower fan to provide part cooling when using a Phaetus Rapido hotend with my mount. Obviously draws inspiration from the Voron Stealthburner. No X or Y travel is lost with this toolhead.

 

Uses all stock screws/parts, aside from 2 M3x45mm bolts to attach to the gantry. Provides a location to mount an LED light bar aimed at the nozzle. 

 

Consider this a WIP, and I will gradually roll out updates based on both my own and any feedback received from end-users.

Tagi