RepRack Adapters for Muscle Rack Heavy Duty Shelf (two versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of two different RepRack Wall Cleats/Adapters for Muscle Rack Heavy Duty Shelves
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A set of two different RepRack Wall Cleats/Adapters for Muscle Rack Heavy Duty Shelves.
There is a single-hanger version and a double-hanger version (pictured).
I wanted a nice way to mount a RepRack above my printer in the unused (wasted) space in a convenient area. I made a double-hanger version for peace of mind when it comes to structural rigidity, given the rack is directly above the printer.
Designed to use ½" hex headed bolts. Should also work with 12mm hex-headed bolts, although I imagine they will fit a little looser in the hex-cutouts, but should work just fine otherwise. I bolted the Hangers together using some M3 button head screws, washers, and nuts to double them up.
I also designed a push-in retention clip (single and double version) to ensure that the hangers do not “jump” out of the cleats/adapters and fall. They should work with nearly any version of this or the original cleats/remixes as long as the original model's dimensions are preserved. They can be found here.