Air extraction HEPA Prusa Original Enclosure with thermostat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AIr extraction system for Prusa Original Enclosure with thermostat (optional)
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 1239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Use this upgrade with HEPA filter sell by Prusa :
https://www.prusa3d.com/product/hepa-filter/
Thermostat 12V :

Programming :
Once connected, to be able to configure it, you must hold the left button for a few seconds. Then with the middle and right button Modified the setting with the lettre “H” (heater) by “C” (cooling). For the other setting I stay on P0. Personally I set the thermostat at 32 °C. This has the effect that the exhaust fans turn on when the temperature reaches 34 °C and cuts when it drops to 30 °C.
Power supply :
12V PC 120mm Fan was necessary