Air extraction HEPA Prusa Original Enclosure with thermostat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AIr extraction system for Prusa Original Enclosure with thermostat (optional)
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 61
- Makes
- 0
- Views
- 1,239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Use this upgrade with HEPA filter sell by Prusa :
https://www.prusa3d.com/product/hepa-filter/
Thermostat 12V :

Programming :
Once connected, to be able to configure it, you must hold the left button for a few seconds. Then with the middle and right button Modified the setting with the lettre “H” (heater) by “C” (cooling). For the other setting I stay on P0. Personally I set the thermostat at 32 °C. This has the effect that the exhaust fans turn on when the temperature reaches 34 °C and cuts when it drops to 30 °C.
Power supply :
12V PC 120mm Fan was necessary