SIM RIG CABLE CLIP for all aluminium profiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a clip for tidy sim-racin cables—fits any aluminum profile, secure and removable by turning 90 degrees.
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 883
- Wydruki
- 2
- Wyświetlenia
- 3374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I love sim-racing, but I also want all the cables neatly tucked away. That's why I designed a clip that can easily slide into the rails of any type of aluminum profile. Once inserted, you can rotate it 90 degrees to secure it in place. It's firmly held, preventing any back-and-forth movement. You can thread cable ties through it to secure your cables.
If you need to remove the clips, simply rotate them back 90 degrees.
Specs:
- SIM RIG CABLE CLIP(S) L25 mm x W25 mm x H28 mm
- Printed on a Prusa MINI
- Prusament PLA Jet Black
- Gram per clip: 4.73
- 1.59 Meters
- Cost: €0.17
- Time: 41 minutes
- 0.15 mm Quality
- 15% fill, no brim
NOTE!
I recommend manually adding support under the part that goes into the rails and printing it on its side.
You can achieve this by placing the design on its side in PrusaSlicer, manually drawing support, and then checking the support option in the settings before printing!