Llama Tape Dispenser (magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fun and practical tape dispenser in the shape of a llama!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Fun and practical tape dispenser in the shape of a llama!
The design is based off of a wooden tape dispenser I had once.
Printing guide:
No supports needed when printing.
I oriented it so the locking mechanism is parallel to the printer axis, but I guess it should work either way.
Materials:
This model uses 8 small 4x2mm magnets and a piece of a hacksaw blade.
I clipped the hacksaw blade to a length of 22mm with some end-cutting pliers.
Magnets: https://www.amazon.com/FINDMAG-Magnets-Magnetic-Whiteboard-Refrigerator/dp/B0B5GHPXGK/ref=sr_1_3?keywords=magnets%2B4x2&sr=8-3&th=1
These are the exact ones I used: https://www.amazon.de/dp/B07RT9MY52?ref=ppx_yo2ov_dt_b_product_details&th=1
Assembly:
- Place the magnets into the holes. You might want to use a tiny bit of glue. Pay attention to the correct polarity!
- Place the hacksaw blade into the slot on the neck (I didn't need any glue for this).
- Slide the llama together and you're good to go!
