Llama Tape Dispenser (magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun and practical tape dispenser in the shape of a llama!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 61
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Fun and practical tape dispenser in the shape of a llama!
The design is based off of a wooden tape dispenser I had once.
Printing guide:
No supports needed when printing.
I oriented it so the locking mechanism is parallel to the printer axis, but I guess it should work either way.
Materials:
This model uses 8 small 4x2mm magnets and a piece of a hacksaw blade.
I clipped the hacksaw blade to a length of 22mm with some end-cutting pliers.
Magnets: https://www.amazon.com/FINDMAG-Magnets-Magnetic-Whiteboard-Refrigerator/dp/B0B5GHPXGK/ref=sr_1_3?keywords=magnets%2B4x2&sr=8-3&th=1
These are the exact ones I used: https://www.amazon.de/dp/B07RT9MY52?ref=ppx_yo2ov_dt_b_product_details&th=1
Assembly:
- Place the magnets into the holes. You might want to use a tiny bit of glue. Pay attention to the correct polarity!
- Place the hacksaw blade into the slot on the neck (I didn't need any glue for this).
- Slide the llama together and you're good to go!
