1 / 5
All In One RAK 19007 Enclosure With Groundplane Antenna — zdjęcie 1
1 / 5

All In One RAK 19007 Enclosure With Groundplane Antenna

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to build a 1/4 wave groundplane antenna for a fixed location meshtastic node and have the radio fully enclosed.

Ocena
0 / 5
Polubienia
19
Pobrania
72
Wydruki
0
Wyświetlenia
1547
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

This is a groundplane antenna jig you can use to make an antenna with a short pigtail of feedline.  It fits over regular 2" central vac PVC tubing, or you can print your own tube.  Inside the tube there is a board to mount a RAK 19007 base board with accessories mounted, I am using a RAK 13800 with 19018 for POE to my meshtastic node.  The inspiration for my antenna jig was this one https://www.thingiverse.com/thing:4839040

 

Once your antenna is made and you've got a connector on the pigtail, mount the radio on the board and into the ring.  the ring keeps the board from moving around inside the tube.  There are two board sizes provided, depending on the length you need.  

 

The plug in the bottom was an easy way I found to get a cable up into the tube and provides a customizable fit for the cable you're using to keep the weather out.  The idea for using a plug came from https://www.printables.com/model/305015-tbeam-outdoor-enclosure

 

I used this calculator for element and radial lengths for my antenna https://m0ukd.com/calculators/quarter-wave-ground-plane-antenna-calculator/

 

 

Tagi