1 / 5
All In One RAK 19007 Enclosure With Groundplane Antenna — image 1
1 / 5

All In One RAK 19007 Enclosure With Groundplane Antenna

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I wanted to build a 1/4 wave groundplane antenna for a fixed location meshtastic node and have the radio fully enclosed.

Rating
0 / 5
Likes
19
Downloads
72
Makes
0
Views
1,547
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a groundplane antenna jig you can use to make an antenna with a short pigtail of feedline.  It fits over regular 2" central vac PVC tubing, or you can print your own tube.  Inside the tube there is a board to mount a RAK 19007 base board with accessories mounted, I am using a RAK 13800 with 19018 for POE to my meshtastic node.  The inspiration for my antenna jig was this one https://www.thingiverse.com/thing:4839040

 

Once your antenna is made and you've got a connector on the pigtail, mount the radio on the board and into the ring.  the ring keeps the board from moving around inside the tube.  There are two board sizes provided, depending on the length you need.  

 

The plug in the bottom was an easy way I found to get a cable up into the tube and provides a customizable fit for the cable you're using to keep the weather out.  The idea for using a plug came from https://www.printables.com/model/305015-tbeam-outdoor-enclosure

 

I used this calculator for element and radial lengths for my antenna https://m0ukd.com/calculators/quarter-wave-ground-plane-antenna-calculator/

 

 

Tags