Ritewing Mini Drak Servo Reducers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ritewing Mini Drak servo pockets are direct fit for Corona DS-339MG servos, those are low quality and very sensitive…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ritewing Mini Drak servo pockets are direct fit for Corona DS-339MG servos, those are low quality and very sensitive to 1.3Ghz video, they will rattle and behave erratically when the VTX is near by.
I use BlueBird BMS-390DMH (Coreless) servos, I've tested them with 1.3Ghz antenna 5 mm near by and they behave perfectly, no rattle no misbehaving...this is a high end servo from high end manufacturer. Rebranded by HK as Turnigy TGY-390DMH if no BB dealer in your region.
For installation of the BMS-390DMH into MD small reducer was needed to account for different size, enjoy.
Category: R/C Vehicles