Duplo to Brio/Lillabo converter brick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a piece that interconnects between Duplo bricks from Lego and Brio or IKEA LILLABO wooden train tracks.…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 222
- Wydruki
- 4
- Wyświetlenia
- 944
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3D printed piece that works as an interconnect between Duplo bricks from Lego and Brio or IKEA LILLABO wooden train tracks.
I was inspired by http://www.thingiverse.com/thing:4041, but after trying out a print, I found it too difficult for the 3 year old to put the tracks on, and I decided to make my own, slightly simpler design.
It's designed in OpenSCAD and I have uploaded the .scad file along with the .stl file, so that you can easily modify as needed.
There are two sets of files:
- The original ones, that are designed from the BRIO track and their dimensions
- New updated version that better fit the IKEA LILLABO, as they seem to have a slightly shorter connecting part
I don't have any BRIO tracks to test with at the moment, but they might actually fit, though sometimes maybe a little tight, which is the case for the LILLABO on the original design.