Hygrometer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for mounting the ThermoPro TP357 inside my 5 Gallon Bucket, "Drybox". It also makes a good desktop stand.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I designed the holder to mount my ThermoPro TP357 bluetooth thermometer/hygrometer inside my “dry box” (5 gallon bucket with screw lid). Using double side foam tape it is curved at the back in order to match the diameter of a 5 gallon bucket. You can leave the stock fold out stand attached or remove it. If you choose to leave it attached, then fold it open before placing the hygrometer in the mount.
I realized after I had printed it that it also makes a nice, stable desktop stand with a good viewing angle. You will find that the stock fold out stand is prone to tipping over.
I printed using a brim inside and out to make sure it didn't warp. You may decide you don't need the brim for printing.
The ThermoPro TP357 are available on Amazon for a reasonable price.
Here is a link to my dry bucket…