Honeywell Doorbell Speaker Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket made for attaching a Honeywell (wireless doorbell system) speaker.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket made for attaching a Honeywell (wireless doorbell system) speaker.
It is not rare that I find that spare parts for products are not kept in stock for a longer period of time, so I decided to reverse engineer this bracket (honestly I never had the original mount so I've had to look at the speaker and work out for myself what a mount might look like!)
The bracket screws easily to the wall and then the speaker can be securely hung in place and taken off just as easily. This bracket fits the DC9XX-models.
PRINT SETTINGS
Material: PLA
Time to print: 42minutes
Dimensions: L:114mm W:35mm H:37mm
Used filament: 7,2 grams
The protruding hooks were relatively small and my Prusa MK3 had a hard time printing them as the plastic doesn't cool down with each new layer so I added a cooling tower (ellipse shaped part next to the mount, included in the STL-file)
I printed with supports under the bridging areas (the underside of the hooks).
Printed at layer height 0,2mm with 20% infill.
A brim may be needed around the perimeter of the main body or use glue stick (I used glue).
Please kindly take a moment to show your support by giving this a LIKE and downloading it. Thank you so much for your support and I hope you enjoy it!