Click-Together Train Track Bridge Supports (Brio & IKEA compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable train bridge supports which click together and are also stackable.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 165
- Wydruki
- 2
- Wyświetlenia
- 860
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you have these train sets then you know how much the kids love them. After some time they get bored and need new challenges… well, here it is!
I needed something which would allow us to make higher bridges, but also stable enough that didn't fall apart when touched.
These fit the Brio and IKEA tracks, and I made the tolerances so large that most train sets should fit without any issue.
To stack: Turn 90° to one another, squeeze the short sides and click them together (best done by an adult). The connection is strong enough for even the most active kids.
To print: best to print the track inside the riser to save build plate real estate. Once done, just push/click them together.. there should be no glue required.
The riser is best print with a skirt, as the footprint is quite small and they like to move on the build plate.
To store: these stack together quite nicely to save space in the kids toybox, and makes cleaning up fun for the kids.
Also if you need some connectory: https://www.printables.com/model/243928-rapid-print-track-connector-for-brio-ikea-wooden-t
Happy Printing!