1 / 6
Dust trap on a bucket (for Bosch GAS25 etc.) — zdjęcie 1
1 / 6

Dust trap on a bucket (for Bosch GAS25 etc.)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made the remake to fit the Bosch Gas25 vac tube's tip connector right in place.

Ocena
0 / 5
Polubienia
11
Pobrania
77
Wydruki
0
Wyświetlenia
533
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Remodeled the original model so that the tip of the Bosch GAS25 vacuum cleaner tube could be connected at once. To join the original finished part "body2" I drilled out the holes with a 2.5mm drill (careful not to drill through) so that the M3x10 screws could be screwed in more easily.

“Переделал оригинальную модель, чтобы наконечник трубки от пылесоса Bosch GAS25 подсоединялся сразу”. Чтобы соединить в оригинальной готовой детали "body2" рассверлил отверстия сверлом 2,5мм (осторожнее, чтобы не просверлить насквозь), чтобы винты М3х10 вкрутились полегче.

Tagi