Adafruit MACROPAD RP2040 Notched Stands,Holder & Rotary Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 1152
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 (https://www.adafruit.com/product/5100) or (https://www.adafruit.com/product/5128). The difference with this design versus my other design/thing (https://www.thingiverse.com/thing:4907617) is that this design/thing has notches on the inside of the stand for the holder that the MACROPAD sits in.The holder that I printed was done in TPU, but I adjusted the tolerances so that you can print in almost any material. On the bottom of the stand, you can use rubber feet (https://www.adafruit.com/product/55) for better traction.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
200
Infill:
20
Filament:
Hatchbox PLA,ABS,TPU.etc.. any
Notes:
No supports are needed as long as you orient the models as shown.
Category: 3D Printing