1 / 2
VZ-RatRig Mount for Tentacool + Beacon Rev-H, and CPAP — zdjęcie 1
1 / 2

VZ-RatRig Mount for Tentacool + Beacon Rev-H, and CPAP

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 2-part Mount for the V-Core 3.1 VZ-Printhead that supports CPAP, tentacool, and Beacon Rev-H

Ocena
5 / 5
Polubienia
22
Pobrania
116
Wydruki
1
Wyświetlenia
1565
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Remix of the original mount by SaftySquints to accommodate the new Beacon Rev-H probe. This is for the RatRig V-Core 3.1 VZ-toolhead only. 

Note: Although the file looks like it is 1 object, the .3mf is 2 (the tenticool duct and CPAP mount)! It just exported that way from CAD

Y-offset for the Beacon is the same as the original model. 

 

Edit: Added 4mm and 4.4mm heat-set insert diameter versions in case the holes were too large. 

Edit 2: STEP uploaded!

Edit 3: Added a 19mm CPAP tube model by request!

 

Happy printing!

Tagi