Inox MX6 LM8UU Grease Applicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified LM8UU Grease Applicator – Bearing Pacifier Adaptor
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inox MX6 LM8UU Grease Applicator – Bearing Pacifier Adaptor
A grease applicator ("bearing pacifier") for LM8UU linear bearings, modified to thread directly onto an Inox MX6 30 g grease tube. Slip the LM8UU over the nose, give the tube a squeeze, and the bearing is greased evenly and cleanly — no mess, no cotton buds, no wasted grease.
This is a remix of Honza David's Prusa Lubricant LM8UU Adaptor (Bearing Pacifier), re-threaded specifically for the Inox MX6 30 g tube, which has a different nozzle shape and thread to the original Prusa lubricant tube.
✅ Features
Greases LM8UU linear bearings cleanly and evenly
Threaded to fit the Inox MX6 30 g grease tube
Extended, re-profiled threaded section for a secure fit
Quick, simple print
🖨 Recommended Print Settings
Setting | Value |
|---|---|
Material | PLA |
Layer Height | 0.2 mm |
Supports | Not required |
💡 PLA is fine here — it's a light-duty workshop tool, not a structural or heat-exposed part.
🔧 Use
Print in PLA.
Thread the applicator onto the Inox MX6 30 g grease tube.
Slide an LM8UU bearing onto the applicator nose.
Gently squeeze the tube to push grease through and coat the bearing.
🔩 Compatibility
Bearing: LM8UU linear bearings
Grease tube: Inox MX6 30 g
Found it handy on your printer? A make or comment is always welcome.