1 / 3
Deebot T10, T20 - Robot Vacuum Detangle Tool Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detangle tool holder for keeping the tool with the robot vacuum.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Deebot T10 (and T20) robot vacuum comes with a detangling tool (encased razor) but doesn't have a location to store it where it is most convenient – on the robot itself. This model allows you to slide the tool in and lock it in place. These tools are pretty universal from what I can tell across many brands (Wyze for example), so it probably works for those as well.
Some notes:
- My printer is an X1C, so tolerances are very tight. If your printer is not dialed in, you may need to adjust or do some sample prints.
- Attach to the lid (see pics) with double-sided tape, I used really thin tape. It sits below the LIDAR line of sight.
- Model is designed to print without supports.
- Fusion 360 (.f3d) file is included for your remixing needs.