Liczymy pasujące modele…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
French mailbox PTT T10 key. Print as it is, 0.2mm layers, with automtic tree supports. Be sure to remove all supports.
A universal adapter for the X20V Parkide tool battery with an addon for connecting a Pinecil or T100 style soldering iron. The adapter can be used to attach your own addon. I included a step file for remixing the designs to your own…
I've included a Reverse Model for use with some 3rd party chargers. Fusion 360 File included!
2025/02/03 Added STEP file A collection of cases, frames or holders for the Seeed Studio SenseCap T1000-E. Any ideas welcome, please add your suggestion in the comments. Printing info (I use Orca Slicer 2.2.0): up right no supports needed…
There were a few errors with the meshes so parts were becoming separated and broken, they don't now. Also they are STL now instead of 3MF.
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
This is a custom box for Lamy T10 ink refill cartridges. There are two versions, one for 5 cartridges and another one for 9. They have an opening on the cover, so you can quickly check how many cartridges are left and which colors they…
Schlitten für den Antrieb (DL-DT1005) für den JYSK-Fernsehsessel Der Schlitten beinhaltet das 2x14x8 Trapezgewinde oder andere Modell mit Trapezgewinde 2x14x6 Er ist einfach zu tauschen, in dem man die Antriebsverkleidung öffnet. Die…
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
I'm printing these in PETG with 15% infill. But really all settings are at your discretion as long as the durability will suit your own purposes. I recommend ‘molle V2,’ especially for straps as the cuts are center on the molle clips…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Custom made box for Smart10 trivia game. Including 1mm / 2mm thick marker-card, to keep track when the question cards are played through. Everything prints without support. Buttons have to be printed with TPU to work. PLA does not work,…
A simple and easy to print case for Chinese AHT20 sensor. max cable diameter : 6mm (¼ inch) The cable can be lock with a 2.5mm(1/10 inch) zip tie and they are a hange for a fixation zip tie on the top. The sensor fixation hole suit with a…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
I just started playing with Meshtastic radios. I ordered a bunch of different ones. So far I like these the best: Seeed Studio T1000 ( https://amzn.to/3EzfasS ) Lilygo T-Echo ( https://amzn.to/4hq5UpG ) RAKWireless Wismesh Pocket (…
Weight weenies rejoice! Here's an M5x0.8 screw with a T10 (Torx) head designed to fill unused holes on a bicycle frame for water bottle cages and similar. More secure than press-in plugs, and lighter than most of them when printed for…
I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…
Printed with standard PLA settings on Kingroon. It's made for 22mm wide handlebars and shall be fixed using small gum between handlebar and holder to avoid scratches using tie-wrap
This is a limit switch carrier that can be added to a Raymarine tiller pilot to prevent the unit from self-destructing in case the motor attempts to drive the unit beyond its physical limits. It needs to be printed in PETG, HT-PLA or…
Torx is a wonderful standard, better than just about any of the others out there, and lends itself well to being used in printed parts. I often use them and will have to dig up my previous parts to see the dimensions that worked in the…
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
This battery cover mod enhances the stability of the Futaba T10PX transmitter. Designed to replace the stock battery cover, which can cause the T10PX to tip over easily, this mod adds balance and prevents falls, making your transmitter…
use m3 heat set insert (5mm OD, 3mm length) and 6mm m3 bolt OR just use zip ties in the corners 🤷
Wife didn't like the tripod the with the T10 growlight. Matched the base dimensions and made a sleeve matching the tube frame height. Added a couple nubs on the bottom to prevent any twisting and help lock it down. Dimensions are built…
A Gridfinity storage bin for the TX10 screwdriver that was included with the Prusa XL Here is a link to the Gridfinity origin video.
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount100 technology. Open the step file in a CAD program and construct tabs at the points where screw connection points are required. We…
Какое то время мучился с этим шарниром. Сначала начали выпадать маленькие внешние заглушки, пытался их клеить и суперклеем и на двухкомпонентный poxipol, всё равно всё вылетало, терлось. В итоге выломались и внутренние части шарнира и…
WORK IN PROGRESS - At this point no one has printed and assembled one of these units other than me. The documentation on required electronics, wiring, and software setup is not complete. At this point you should consider yourself an…
Piggyback clip that can be attached with double-sided adhesive tape and holds a single T1000-E. You may experience issues with reception depending on orientation and phone usage!
I am quite happy with my table saw MLT100 from Makita. Nevertheless, it is designed for cutting construction timber. But I often use it for cutting firewood made from crooked branches. In the process, from time to time the branches bounce…
We recommend printing only ABS or ASA if the adapter is to be used in a car. It should be printed without supports with a layer thickness of 0.15mm.
This is a replacement gear for the Dyson V6 motorized brush head. There was a number on my original gear: “T103310 2B”. I do not know if that is a model number or not. It goes inside the motor assembly and connects the motor to the brush…
This is a weed guard for use with Blue Robotics T100 and T200 thrusters. The front unit mounts under the stock nosecone. You will need two 10mm M3 stainless cap head bolts to mount this, the stock bolts are not long enough. The rear guard…
This is a replacement horseshoe for Champion brand auto trap machines. Part SKU AT1023BK. I made this part using Solidworks.
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
Added some extra protection for the front. Made it in the style of TinnierMonster4 's roof skid plate so that matches aesthetically. I've only tested both on the MT10 V2. I used some leftover m3 screws to fasten it.
These locks are referred to as M24T10 and are commonly used for utility boxes (such as electricity meters). I have some keys around but occasionally I give them to others so I figured I could print some. It should be small yet comfortable…
Slide for the CNDOER DL-DT1005-001-02 (and probably other numbers). Threads are ISO Metric Trapezoidal 14x3 2 start threads. I chose to make the slide stronger than the origial, and therefore the aluminium cover can no longer fit. See the…
I use this clip: https://amzn.to/49yIZ8n But you can also just search for UV-K5 clip on ali or other sites. I printed it vertically to give it the strongest layer lines for both the clip and the tracker. So be sure to use a brim or raft…
A holder for magnetic cable for Sensecap T1000-E
For mounting your Asus ZenWifi devices on a wall. Open bottom for button access and cable feeds in rear for power and LAN/WAN cabling. The proximity to the wall requires angled ethernet cables. As seen in the images with a BT10 unit and…
Toyota T100 hood rod retainer. Probably could be generic. This version has a nice fit, but did fail when I tried to remove it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill:…
BASIC MODEL: KCD3 T105 85 16A 250V AC SWITCH
chain guard for shimano altus fc-mt101 front crank sprocket. best done in petg, but should be ok in pla.
Print flat side down. Was designed for 0.45 mm line width. Adjust size +- 0.5% if necessarily.
Team Associated Rival MT10 Replacement Wheel Nut Cover
Print with no supports, upright. The original creator designed a custom support to avoid the Cura calculated ones, it just snaps off with some long nose pliers. I used a 60mm/s print speed on my Ender 3 Pro, and the Standard Quality…
Simple remix of nalanengine's base for the Wagner HT1000 heat gun. Great way to secure it when it's hot. The base simply slides onto the back end of the heat gun. The original is great, but its hollow base may be aesthetically pleasing…
This is a funnel with stopper (plug) for a SuperTrickler. I didn't like the potential for something to potentially fall into my SuperTrickler when not in use and wanted an easy way to seal it up. Print in the orientations provided, no…
Es hat mich gestört das unser SRT10 das normale Widder Emblem hat, also habe ich dieses Entworfen am besten in TPU drucken in Ihrer Wunschfarbe und mit den Vorhandenen Emblemen ersetzen (Haube , Heck und Lenkrad)
Looking for a low power home lab with high performance networking? Upgrade your Intel NUC 12 Pro with a 10Gbe LAN module! Works out of the box with ESXI8 and Proxmox 7.4 and uses about 12 watt idle in Proxmox, 14.5 watt idle in ESXI.…
Key for Garmin Approach golf sensor CT10 to replace battery
Entriegelungswerkzeug für Fahrpedal eines VW Golf VI, Baujahr 2012. Release tool for a accelerator pedal of a VW Golf VI, construction year 2012. accelerator pedal OEM: 1K1721503AN
CPAP and Wire Guide for RatRig Vcore3 ^300 with PT1000 mount and shelves Please upload your makes, would love to see them
self created model of the original Volkswagen-Tool T10613. It is used for postitioning the clutch in the gearbox with the code KUT.
In order to mount this panel to a wall, i made these, the shortest on the top and the longest on the bottom to get an angle for better view. Can use two long if you want it flat and still room for cable behind. I got the idea from…
Team Associated Rival MT10 wheel nut cover tool.
I created this pegboard holder so my heat gun would have a place to live. I used generative design to create the back portion of the holder. So far I have had no issues with the hot heat gun warming up the holder or pegboard. This fits a…
V2 now available! I've updated the model with a cutout at the top to allow the T1000's strap or lanyard to pass through — a common issue with the original design. V2 also features smoother, more refined edges and additional rounding work…
Sensecap T1000-e wallmount Remixed from another design. Added walls so its more secure and straight when the card is in. If the cable comes out on top mirror the file. Otherwise your logo on the card will be upside down. Disclaimer My…
For another clamp size, open the Fusion file and change the thickness (like in the Photo) You can also add text in your slicer, like in the photo. Label Clip for Phoenix Contact Marker für Klemmen
Quick manually measured model to test my and others' designs for fitment and orientation. I don't currently plan to print it, but if I do I'll print it vertically with a brim. The pics here are rendered from the textured Fusion model…
You need x5 m3 40mm screw x1 m3 10 screw and x4 m3 nuts. Molded sock fits like a glove on pt100 volcano heatblock
Screen support for the Epomaker RT100 Helps to make sure that the USB C does not get damaged when having weight put on it from above.
Free floating on airsoft doesnt really convince me and I didn't like wobbly barrel, so I decided to remove gap from my T10. Printed on wider side, with little support for that small block.
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
Print front down, with supports (for cable peds mainly. Use tape on the from to secure to surface for use. Includes post for winding excess cord. Designed in Onshape:…
This is an update of my printable Blue Robotics Thruster intake guards for use with the T100 and T200 thrusters. The origional guard offers slightly less drag, but is weaker and more difficult to print. These guards are strong, can be…
The handle is suitable for the Makita table saw MLT100, but likely also for other tools with a similar handle (M8 bolt attachment). The used bolt is 8x50. In contrast to the original, this version of the handle has a cap, under which it…
When you're overhauling your ATE 60 calipers you come across a big problem while trying to mount the dust seal - it's impossible without a special tool. I got it from VW and measured it and designed 2 versions of it. One like the original…
I printed mine in Overture TPU . It's a little squishy but should absorb hits and I never have to worry about breaking it again. 100% infill is probably excessive but I did it anyway. It may work in PETG but I don't know if it will be…
Werkzeug zum Zentrieren der Kupplungsscheibe für VW , Skoda, Seat, Audi 2.0TDI Motoren. Original Werkzeugnummer T10097 Datei darf nur für die Eigenanwendung gedruckt werden nd nicht für den Verkauf!!
For those running enough power to wheelie an SMT10, here are a couple wheelie bar options. I'm running a 3600 KV brushless with an AX2 2-speed. 3S in high will wheelie or flip instantly. 2S will wheelie on grass, but often just spins on…
I made replacement tips for the Jakemy JM-T10-11 tweezers, because they tend to break or crack easily. I printed them in PLA, but a carbon fiber filament should be better since in is stated that the original ones are made from carbon…
Here's the CAD I used to create my The 100 . I tried to repurpose a lot of an Ender 3 V2, including the bed, mainboard, and steppers. Because of this, I had to make some changes to the design to suit my needs. I hope that other people in…
This is a casing for replacing a W5W bulb on a motorcycle Check the project out: https://cad.onshape.com/documents/92e5c3f798f8a6130066ce51/w/ae7076d22dcda7223fb65552/e/e8d850c0570b8a4c87a23cd0?renderMode=0&uiState=66744d19abe31d625ad50dec
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
Ce modèle 3D représente une clé universelle T10 , utilisée pour l’ouverture des boîtes aux lettres standardisées et certains coffrets techniques. Le profil T10 est courant sur les serrures individuelles et collectives en Europe. Conçu…
Printed in Overture TPU . I've taken it to the skate park a few times and so far it has held up fine. The wheelie bar is optional and no longer adjustable. Being TPU, it is a bit squishy but it works well enough and won't break. I also…
Had to install a few Hik Vision cams… found out in short order… the L driver is rubbish… so we came up with a solution. cut the L short and epoxy it into the 3d printed handle. Much easier to utilize :D :D :D Enjoy!
The is a 3 point adjustable mount for the Optoma GT1080. http://www.optomausa.com/projectorproduct/gt1080 The projector has such a short throw that it's great for setting on my bed and watching movies on the wall. However, the projector…
The original part was too wide for my Rival MT10 V2 and it covered the holes for the Body Mounts. So i made it narrower and cut a bit away at the sides. I also cutted something from behind so that it is easier to print on the flat side.…
A FDM printable friendly cap for a 360 prism (MT1000 360 prism or simialr) to replace or repair missing or broken caps. Simply screws on like the original. The FDM printed thread is tight, running it back any forth a few times will…
Kupplungsdorn zum Zentrieren der Kupplungsscheibe für VW T5 & T6 2.0TDI 102PS 115PS 140PS 178PS Clutch Tool for VW Transporter, Multivan, Caravelle, DOKA T10372
Spur gear for Carisma GT10 DT RC car. May fit the GTR to. Print Settings Printer: Tevo Tarantula Rafts: No Supports: Yes Resolution: 0,2 Infill: 100% Notes: Use small nozzle 0,2-0,4 for best result. Use durable filament How I Designed…
This utilizes one of the M19 threaded ports on the FormD T1 to add 10 Gigabit Ethernet using the Innodisk EGPL-T101 M.2 module. Use M3 screws to attach the ethernet port to the gasket. Make sure the screw head does not protrude past the…
Team Associated Rival MT10 replacement side Exhaust pipes.
Remodeling of the Corsair Smart Tower kit LT100, compatible with iCue, modeling not finished but I share my files with you to improve them. To create the towers, you will need: PLA (naturally) Black or Other and white for the bottom band…
BOM: 24x M3 Brass Knurled Heatset Inserts 20x M3 8mm SHBC 6x M3 18mm SHBC Optional Double-sided tape between frame and uSDX and AT100
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
A box/container for Smart10-game question cards. Box/container has 8 compartments, each compartment fits 50 cards = 400 cards.
Rod end for Thunder Tiger DT10 (and probably others). Don't know how it will hold up. Category: R/C Vehicles
DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby
