1 / 3
Deebot T10, T20 - Robot Vacuum Detangle Tool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Detangle tool holder for keeping the tool with the robot vacuum.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Deebot T10 (and T20) robot vacuum comes with a detangling tool (encased razor) but doesn't have a location to store it where it is most convenient – on the robot itself. This model allows you to slide the tool in and lock it in place. These tools are pretty universal from what I can tell across many brands (Wyze for example), so it probably works for those as well.
Some notes:
- My printer is an X1C, so tolerances are very tight. If your printer is not dialed in, you may need to adjust or do some sample prints.
- Attach to the lid (see pics) with double-sided tape, I used really thin tape. It sits below the LIDAR line of sight.
- Model is designed to print without supports.
- Fusion 360 (.f3d) file is included for your remixing needs.