224 models
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
Thruster Guard: A Southern Ocean Subsea Creation Enhanced Durability: Designed specifically for the BlueRobotics T200 Thruster . Protection: Offers a robust shield against unpredictable underwater elements. Performance-Oriented: Carefully…
Support to hold e bike braking sensor on shimano MT200 brakes, left and right, no glue needed, it is held using the same fixing screw of the brakes, see photos. (but if you want to be more sure that it does not come off, you can use glue,…
Design I bought a couple of AHT80+BMP280 sensor boards from AliExpress to play around with Smart Home stuff. There was however no suitable case to protect the sensors from dust and accidental damage, so I designed one. The design assumes…
I don't know if it works with other models. Will probably need some sanding after printing in order to fit. Can also be printed in other materials. The one you see in the photo is -sanded with 180 and 400 grit -primed -sprayed black
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Holder for sensor GY-BME280 3.3V (humidity, temperature, barometric pressure). BME280 Link to my models 0,15 mm layer. Sensor mounting: Allen screw M3x6 or 8 Fixing the top cover (but not needed, the cover holds on its own): Allen screw…
A simple and easy to print case for Chinese AHT20 sensor. max cable diameter : 6mm (¼ inch) The cable can be lock with a 2.5mm(1/10 inch) zip tie and they are a hange for a fixation zip tie on the top. The sensor fixation hole suit with a…
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
This is a microphone stand I made for my roommates AT2020 to sit on his desk under his monitor. I used a variable layer height to print this, ensuring good resolution for the threads and a faster print time on the base.
Its a model of T20 Cricket world Cup 2024. Inspired from the original trophy
Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts
Original model from Thingiverse from RayTruant , this model is remixed to fit my Iphone 15 Pro with Rugged case and better 3d printer friendly now , you can print without any supports.
I made this case because I could not find one that fits my needs. I use this setup for a beer fermentation controller, for this reason, the current version only has an opening for the micro USB connector and another opening for the 1-Wire…
I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…
Spare parts for Autohelm (now Raymarine) AH800, AH1000, AH2000, ST1000, ST2000 tiller pilots. One version of the end plate is constructed without provisions for an o-ring. Original is with o-ring. Groove depth is chosen a bit shallower to…
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
I changed the model to one with less resolution. Let me know if you have a good reason to get a better resolution.
I wanted to make it simple, to cover stick and to allow having a strap on it. it fits 2.4 ELRS version. It might not fit other variants. Thank all the people who uploads 3d scans of random things to the internet. Keep inind that step file…
This is a tiny case for a XIAO esp32c3 board with room for the wifi antenna and a AHT20 + BMP280 sensorboard (Ali). the pcb's are held in place with a clamp and can easely be installed and removed. the case back snaps to the top without…
Couldn't find one so designed my own. bom: 2x printed parts 4x woodscrew
Originally published here: (WIP) Motorola Moto E7 & E7i Power xt2052 case by tato_713 - Thingiverse This case was designed for the phone E7, E7 Power and E7i Power. It could be compatible too with the E7 Plus, but this one has a slightly…
DEKO battery body 20V BT20XL01 Please don't print this! This is not a battery case. This is an overall model DEKO battery 20V BT20XL01 created for remixes. Expect the appearance of adapters and storage systems ) Original: BT20XL01…
Originally published here: (WIP) Motorola Moto G9 Plus xt2087 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
Simple gimbal protection for Jumper T20
This is a weed guard for use with Blue Robotics T100 and T200 thrusters. The front unit mounts under the stock nosecone. You will need two 10mm M3 stainless cap head bolts to mount this, the stock bolts are not long enough. The rear guard…
Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…
Push fit Multiboard holder for General IRT207 Laser Thermometer
Update 22-03-28 : DXF file for CNC cut are available , didnt reworked the model , i did cut it myself with my cnc and its working as intented so contact your favorite CNC shop and get some cut ! USA ( Shipping Global )…
I actually bought the wrong size of the 21700 batteries, I did not know that the 5000mAh cell was physically bigger. Anyway, I designed this to fit the 5000mAh versions of the 21700 cells. You have to sacrifice the original battery basket…
The T200 Mounting Bracket makes it easier to mount the T200 Thruster to a variety of surfaces. The mounting bracket is not required to mount the thruster, but if it is difficult to use the normal thruster mounting point, this mounting…
In Campervans der Hymer Gruppe (Carado, Sunlight, etc.) ist das Bedienpanel des Thetford T2090 Kühlschranks so eingebaut, dass man es versehentlich im vorübergehen bedienen kann. So kann es passieren, dass das Gerät auf einmal aus ist,…
The Medium Tank T20, Medium Tank T22 and Medium Tank T23 were prototype medium tanks, developed by the United States Army during World War II. They were designed as successors to the M4 Sherman. The standard main weapon for production…
3D print an individual case for the AHT20 humidity and temperature sensor from Adafruit. This is designed as a snap fit closure with the QWIIC connections accessible for connectivity. There are four standoff inside the base that hold the…
One shortcoming of the Sensorbox v2 is the placement of the AHT20+BMP280. When placed in it's intended location on the PCB, it measures temperatures significantly higher than ambient, also throwing of humidity measurements. This part is…
Will not fit Gemini version because heatsink is different. To actually make this, you will also need connector PCB . This model is created for one like in the pictures – “Jumper T-Pro external module adapter” on aliexpress or this . The…
It is preferable to print with support for better result.
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount20 or 25 technology. Please be aware, that small clips tend to break off easily depending on filament, layer height and printing…
Print two of these laying on the side, get four countersunk screws (I used 4mm ones, 3.5mm would have been a better fit) suitable for the material you're mounting it to, drill if needed, screw it in. Useful if you want the amplifier…
Hi, after my son broken original covers for my best PC speakers Creative Gigaworks T20 Series II, I decided to create my own cover version. Please leave your like if you appreciate my work to motivate me for more. Even better… show your…
DEKO battery BT20XL01 20V wall holder Your printer must be calibrated. You will need support. This adapter is compatible with Makita batteries BL1850B, BL1840B, BL1830B and their analogues: DEKO BT20XL01 and 388VF. Original: BT20XL01…
A very quickly thrown together working shock mount, made for the AT2020 but you can remix the f3d file to match your own needs! Use rubber bands/o-rings/paracord or whatever you have for connecting the inner and outer ring. Print middle…
Two accessories for the Clim T206 Tank : Chain Track Machine Gun (M2 Browning) If necessary, glue the metal rod on the outer edges. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.15mm Infill: 100%…
Gimbal protector for the Jumper T20s. Will need to be printed with supports.
Printed biggest side flat, to be used with my remixed low profile arm for use with Low Profile Mic Arm: https://www.printables.com/model/1050464-sturdier-low-profile-mic-arm
Original auf 79% skaliert (in alle Richtungen) damit ist das Teil etwas kompakter und passt auf die Ecke Thetford T2090
This is a simple adapter made for Dreame vaccum cleaner with internal diameter of 30mm. It was made so that my kid's nasal aspirator can be connected to it.
This is an update of my printable Blue Robotics Thruster intake guards for use with the T100 and T200 thrusters. The origional guard offers slightly less drag, but is weaker and more difficult to print. These guards are strong, can be…
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
- Jumper T20 Gimbal Guard: RR inspired - Washer for M3 Lanyard Screw: the ones from online stores are too big. - Stand for the radio: the radio cannot stand straight by itself. Good for space saving for as Flight SIM controller
This is a transducer mount for a garmin gt20 transducer on a oldtown salty pdl. it fit in the front scupper hole. I used a ¼-20 hex bolt 6 inch long and for the cap 4-40 .5 inch or M3 print with petg abs or asa .2 layer height 6 wall…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
Originally published here: Motorola Edge xt2063 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will probably fit…
Remix of a temperature+pressure+humidity sensor mount dedicated for Sensorbox v2. Mounting horizontally with sensor facing downwards should yield the best possible accuracy due to natural convection. That's also how Air Gradient has its…
Cap for T20 Torx (pan head + 20x1 washer) Pressfits on the screw.
It is sized to fit my pedestal, it is a little bit wider then the original printer, but feel free to modify it.
.3mm layer height and 10% infill work fine. Template used for gridfinity base. https://thangs.com/designer/BuildSomething/3d-model/Gridfinity%20Templates%20STL-616566
This is a custom-designed desk stand for the Audio-Technica AT2020 cardioid condenser microphone. The stand provides a stable and compact solution for desk use, making it ideal for recording, streaming, or video calls without needing a…
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
Display case for an Raspberry Pi 3 model B (fit also for Pi2 Model B) 800x480 5" TFT display with XPT2046 touch screen. This display replaces my old Arduino Display. It runs Repetier Server Pro and is much more comfortable as the old one.…
这是一个Jumper T20/T20S遥控器的屏幕底座，通过与相机快拆组件的结合，实现fpv屏幕的角度调整和快拆。由于安装屏幕后遥控器重心会发生变化，推荐搭配对应的重心调整器使用。需要购买以下部件： 1/4相机云台螺丝，螺帽厚度2.4mm，直径12mm（以下淘宝链接选择 “TF7012”…
This is a mount for a Raspberry 3B+ / XPT2046 screen combo. This is a perfect fit for Octoscreen ( https://github.com/Z-Bolt/OctoScreen ) (Maybe this will fit a RPi 2 also) Mounted on the right side of the CR10. Pictures show a beta…
Same as the original, just with a second hole
This is replacement console hinge for st204 Toyota Celica printed in petg 50% infill
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. The upper hole is meant to be used with a…
This is a scan of a non-marring bumper for the Arrow ET200 electric brad nailer. Mine disintegrated after 12 years. I was able to get a replacement from the Arrow company, but this model is discontinued and there is a limited supply of…
so I needed an end to hold a shock mount for a mic I have. so I modeled this up. made it so you can just use a 20mm M4 bolt with a nut on the other side Printed on an Sovol SV06 plus Supports used on the overhanging end My printing…
Gone are the days of using paints and tapes to personalize your AT2040 microphone. No longer do you need to contact Audio-Technica to replace your mounting ring if broken. I present to you a replica of the original. This item can be used…
Attention: This is Version 1 which will not be maintained! Version 2 Display case for an Raspberry Pi 3 model B (fit also for Pi2 Model B) 800x480 5" TFT display with XPT2046 touch screen. This display replaces my old Arduino Display. It…
Parts Store bought IKEA Tertial Lamp - 10$ M3x12mm Bolt (16x) - 1$ M3 Nut (18x) - 1$ M3x25mm Bolt (2x) - probably free? 2mm Steel wire - 5$ 3D Printed Parts 4x Mic Mount Feet 4x Outer circle feet 1x Mic Mount 1x Outer Circle Print…
This is a base gasket for use on a CT90 K0 or CT200 Air Filter Assembly printed using TPU
Holder multimeter tips No raft and support need. Print Settings Printer: Rebel 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 35% Category: Electronics
The model consists of three parts, the “cup”, where the microphone sits, the “legs” which connect to both the cup and the stand, and the stand, which holds the legs in place. Can be assembled easily, you need m3 screws - they should self…
Print this twice to under-desk mount amp, the screw holes are 3mm diameter, and 5mm deep. This won't work for BT20A Pro as the dimensions aren't the same.
Battery charge base for Dreame T20 pro vacuum cleaner , to charge battery in a standalone configuration (without the original stand, that was too big for me). I create a pre-supported version with small wall under the 4 clips, so you need…
Hi there! Some time ago I had a problem with AT2020 when I want use for it an old pop filter which came with my previous microphone (Neweer). I decide to print some small add-on which give me possibility to mount old pop filter directly…
Designed for HAIBOXING 1:12 RC Desert Truck 2995 part number T2007
Printed from TPU 95A. I had a problem with my mt200 brakes in winter. Snow and ice melt on caliper and then re-freeze on the brake pads and disc, causing a significant loss of braking power.
Display for my Ultimaker 2 mounted without drilling holes for screws. Display case for an Raspberry Pi 3 model B (fit also for Pi2 Model B) 800x480 5" TFT display with XPT2046 touch screen. Items used: Raspberry Pi Model 3 B 5" LCD HDMI…
Lexus CT200h fuse box cover - power outlet fuse V2a - suit for bigger piggy back fuse
All I needed to make a useful model of the knob was a really precise caliper. The rest is history. The smiling face with the misaligned teeth was a request from my son. This was created in Fusion360. Lots of inspiration come from…
Temperature Controller Bezel for Temperature Control Unit SHT20 From Ebay See video for more details https://youtu.be/zsTEjOPljjs This is a temp controller from Ebay (UK/US) designed to fit into Prusabox, but can fit into any other 3D…
This is a loose fit for my battery tester which doesn't have a label but the Amazon description claims it is a BT20.
UPDATED MODEL: https://www.printables.com/model/1329279-t200-thruster-shrouds-v2 Most thruster shroud models for the T200 thrusters have gaps exceeding the 12.5mm limit set by MATE for their ROV competition. These thruster shrouds are…
these should be printed, standing flat on the print bed, with at least 4 walls, to ensure their longevity, from being used in a HAAS ST10 or ST20 CNC lathe.
This is a very specific model which is only useful if you have the combination of a Fujifilm X-T20 camera and a Peak Design Leash sling. The original bottom plate that comes with the sling is too big. So when it's mounted to the camera…
This is a model I made of the hard to find cowl clip for the edge part of the windshield cowl on a Lexus ct200h. I used the OEM one that I had (which I proceeded to drop into the wheel fender and lose). I make no claims of accuracy or…
Replacement of the original Creative GigaWorks t20 or t40 volume control. More control and better grip
I don't use the microphone often, but I don't take it off the stand. To prevent dust from settling, I made a simple cover. I printed this in vase mode with PLA. Now dust doesn't settle on the microphone mesh when I'm not using it.
An update from our previous model - these thruster shrouds are designed around a cleaner and more compact design, while still maintaining MATE ROV compatibility. Used by the Allan Hancock College UROV team “Deep Sea Dogs” for the 2025…
Designed for HAIBOXING 1:12 RC Desert Truck 2995 part number T2007
Atolla T201 Laser range finder - Laser Entfernungsmesser - Holder - Halter Deutsch: Drucke es in der Richtung wie auf dem ersten Foto. ======================================= English: Print it in the direction like the first photo. Buy me…
This model replaces the factory AUX/USB panel in the Lexus CT200h center console with a custom mount for modern charging modules. It is designed to hold common aftermarket USB units that provide USB-C Power Delivery (PD) and USB-A Quick…
Additional and replacement parts for the Mach1 Rocketry BT20 Exiter fiberglass model rocket kit. The files include a BT20 3 fin jig specifically designed for the Exiter, a shock cord retainer, and an elliptical nose cone. The fin jig…
My first sharable design. For all the DnD nerds (like me). Made in Tinkercad. Keycap fits Cherry MX switches. This one now lives on my escape key. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes…
![Raspberry Pi 2&3 800x480 5" XPT2046 display case [Version 2]](https://media.printables.com/media/prints/199094/images/1836954_6f3bab4e-9f90-4a71-b3b6-7f2c23a553bc/bbbfa4a8f3aa5e46e04610486db40363_display_large_19.jpg)
![Raspberry Pi 2&3 800x480 5" XPT2046 display case [Version 1]](https://media.printables.com/media/prints/199109/images/1837187_4c24863a-d672-4e59-b3d4-c00600630a2e/4a47a0db6e60853dedfcfdf08a5ca249_display_large_19.jpg)
