Magnetic Bit Holder for Ridgid Drill/Driver (Clip On)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to clip onto the back of some brushless Ridgid tools
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 276
- Wydruki
- 1
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit.
The basic version will hold bits without magnets or a base. It does not need supports.
The second version is made to use four 6x3mm magnets. I used slim tree supports to allow printing of the brackets which are off the print plate in this model. The bit slots are about 2% larger on the magnet version as well, to make the bits easier to remove.
The horizontal version is currently very tight. You can break it in with a tight fitting allen wrench or other long hex tool. I printed it with supports…