Magnetic Bit Holder for Ridgid Drill/Driver (Clip On)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to clip onto the back of some brushless Ridgid tools
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 277
- Makes
- 1
- Views
- 1,063
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit.
The basic version will hold bits without magnets or a base. It does not need supports.
The second version is made to use four 6x3mm magnets. I used slim tree supports to allow printing of the brackets which are off the print plate in this model. The bit slots are about 2% larger on the magnet version as well, to make the bits easier to remove.
The horizontal version is currently very tight. You can break it in with a tight fitting allen wrench or other long hex tool. I printed it with supports…