Stronger Spool No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,13 € – 0,16 € netto (bez VAT)
Dla pliku: solder spool threaded loose male v5_0.4n_0.15mm_PLA_MK4IS_11m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,14 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 10,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is just the spool for the Case. Same Dimensions. I created 2 pieces that screw together instead gluing.
- Ocena
- 4,692 / 5
- Polubienia
- 55
- Pobrania
- 481
- Wydruki
- 16
- Wyświetlenia
- 825
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original spool required you to glue together the 2 halves which left a weak joint. I created a threaded joint where both pieces print flat with no supports. They screw together and work just like the original but much stronger. Print in ASA, PET-G, or any filament that is not too brittle. .15 layer height helps with the threads but .20 works as well. Happy Printing.