1 / 3
Stronger Spool No Supports — image 1
1 / 3

Stronger Spool No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.13 – €0.16 net (excluding VAT)

For file: solder spool threaded loose male v5_0.4n_0.15mm_PLA_MK4IS_11m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.14 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
10.8 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

This is just the spool for the Case. Same Dimensions. I created 2 pieces that screw together instead gluing.

Rating
4.692 / 5
Likes
55
Downloads
481
Makes
16
Views
825
Reviews
13

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

The original spool required you to glue together the 2 halves which left a weak joint. I created a threaded joint where both pieces print flat with no supports. They screw together and work just like the original but much stronger. Print in ASA, PET-G, or any filament that is not too brittle. .15 layer height helps with the threads but .20 works as well. Happy Printing.

Tags