HDZero Goggle Inserts for FatShark-style Diopter Lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print lets you fit FatShark-style diopter lenses onto your HDZero goggles with the regular faceplate. No need to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
UPDATE: Happy to pop the lenses out of the assembly? You might prefer this print instead.
This print lets you fit FatShark-style diopter lenses onto your HDZero goggles with the regular faceplate. No need to print a whole custom plate --- some assembly required though.
It's a two-part print with supports needed.
Print two sets of each (with one of the plates mirrored for the other eye) at 0.15mmish and then glue together with a dab of super glue + accelerant. You can use the glue "block" to rest it on while you glue it. Cut the flat piece that holds the holders with some snips.
Squeeze it in the goggles far-side first --- should seat with a click --- and then slide your lenses in.
Category: R/C Vehicles