HD Better Basic Board Cover With Symbols for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high definition basic board cover remix with symbols.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Print Instructions:
I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and glossy after the print is done. MUST USE SUPPORTS. I used the paint support enforcers option and added supports to anything over 45 degrees and let PrusaSlicer do the rest by enabling supports through “support enforcers only.” You do not need an MMU to use both colors. I enabled a color swap at 23.75 (279) on the PrusaSlicer timeline after slicing.
I will add more pictures of this part installed once I finish installing my led and filtration system in my original prusa enclosure. For now, I only have pictures of it before installation.
PLEASE LIKE AND COMMENT YOUR THOUGHTS, AND UPLOAD PICTURES OF COMPLETED PRINT! THANK YOU!!