Hand. Cannot. Erase. - Steven Wilson Album Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,70 € – 0,86 € netto (bez VAT)
Dla pliku: 4-H.C.E.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,78 € netto (środek widełek).
- Masa podana przez autora
- 12 g
- Czas druku podany przez autora
- 40,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
💿 🎵 Easy-to-print, part of a collection representing British musician Steven Wilson's discography. No supports. 🎸🟪
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hand. Cannot. Erase.
Hand cannot
Erase this love
I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography.
This can be used as a beverage coaster, or just for display. It is square like a CD or vinyl album sleeve.
This is his fourth solo album Hand. Cannot. Erase, released in 2015. It features a less “jazzy” sound than the previous album, The Raven That Refused To Sing, and it introduces hints of electronic and pop.
I avoided the actual album cover as a lithophane or MMU-only photo. Instead, I simplified it into something friendly for FDM regular setups, inspired by album art and tour merch.
My design is a simple motif seen in the back of the album cover, as well as on some tour posters, with a made-up font of symbols that spell “STEVEN WILSON” in bright violet/pink on black.
If you like Steven Wilson's work, don't miss my other album covers.
--------Print instructions----------
Printing slowly helps with definition of letters and to reduce imperfections, 20mm/s for example. Input shaper ok.
Infill at least 15% to hold top layers or text above, but you can play with patterns and higher percentages.
I didn't use brims or rafts, but you can if you experience warping, especially in the square corners. Temporary water-based adhesive is useful too.
- No supports
- Pause-and-change-filament at certain heights to have different colors, even with a regular FDM setup. With MMU it's even easier
- Scale to whatever size is convenient for you. If the height is too deep you can scale it down in the Z axis
- Feel free to experiment with colors and top fill patterns
- Adaptive layers can help speed up through just square parts, and then have more resolution on text above.
I printed the one you see in my photos switching between black and pink filaments, with a top full layer of monotonic lines.
Modeled by Mexican designer Dany Sánchez, creator of MiniWorld3D & OpenFigure3D.
Follow me on Instagram!
Any Related Indicia are Trademarks of their respective owners. This model is a non for profit, fan work modeled from scratch inspired by album art. No trademark infringement is intended.