Liczymy pasujące modele…
Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…
This is an insert / organizer for Food Chain Magnate and the more recent, larger dry erase milestone boards from BGG. It has no lid lift, supports premium sleeves on the cards (Gamegenic Prime sleeves shown in the images), supports…
Overview: This system utilizes standard, affordable ID cards or RFID cards and works seamlessly with any dry-erase marker. For optimal use, fine tip markers equipped with an eraser are recommended. System Features: 1. Card Storage :…
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
For the Bissell Pet Hair Eraser 2390 Cordless Hand Vacuum: https://www.bissell.com/pet-hair-eraser-lithium-ion-cordless-pet-hand-vacuum-2390.html Model inspired by Etsy listing:…
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
Introducing the TPU Eraser, a residue remover crafted with unwavering precision to vanquish the elusive remnants left behind by the TPUs on the sacred grounds of the build plate. Anticipating meager results, I embarked upon this endeavor,…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…
The tray that comes with dry erase boards cause markers to drop everywhere as soon as you want to have more than 2 color options. Doesn't require any supports, could be printed shorter and still function just as well, so that's more…
A FUN ERASER HOLDER THAT ALLOWS YOU TO HAVE ALWAYS A SHARP ERASER!! Share your prints!! The shape of the holder allows to always have a sharp end of the eraser. Simple Assembly STEPS: I used this ERASER : https://amzn.to/3Xae5gQ (This is…
A useful marker and eraser holder for a whiteboard. Holds 7 markers and 1 eraser. Printing tips: Use PLA with 0.2mm or thicker. Prints well with thick layers. No supports needed Attach with double sided tape.
I loved the design language used by lendres' "Expo Dry Erase Marker Set", but I wanted to store the markers horizontally so they would preserve their ink. After storing dry erase markers vertically and upside down, the ink either drains…
This model is very similar to the original one, except I added two “ears” and two pegs to be able to mount it to the frame of my whiteboard (see pictures). Kudos to @lendres for the original model anf for providing the Fusion360 files so…
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
A simple dry erase marker holder that holds 5 markers and an eraser. The intent is to be attached to the wall. I use PLA and lightning infill.
A simple holder designed to hold 14 Expo dry erase markers and one Expo dry eraser. I initially added 6 small holes in the back to hold six 8x3mm magnets, but I have also included a version with a flat back. I have also included a…
Some modular, wet-erase tokens for lancer RPG in 1, 2, 3 inch options. White PLA+ can work as a wet-erase surface - you may have best results with ironing, or ‘concentric’ top surface. Haven't tried ‘Herbert’ surface. The 1 inch token is…
Heres a simple Magnetic clip to attach your expo marker to a whiteboard or anything magnetic. I didnt have 10x3mm magnets on hand so I just make it with 5 6x2mm magnets. Both files are below. If you would like a different size, feel free…
Motivation: I saw many bulky clips for whiteboard markers and chose to design something more visually appealing. Features: Vertical and horizontal storage is possible Neodymium magnets Ø10x3 mm or smaller magnets or M4 screws can be used…
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Protects your eraser from getting all covered with gunk while it's in your pencil case. Swivel it closed when you need to put it away and swing it open when you need to erase. This version doesn't have any detents to lock in any of the…
I got tired of my markers drying out from being stored vertically so made this horizontal snap in holder. It has a satisfying click and firm hold. The opening is slightly tapered to match the markers and there is an arrow on top point to…
I didn't like any of the existing expo marker holders and my dry erase board in my office isn't magnetic so I needed something that could clip onto the tray. Features : ✓ Prints flat with no support ✓ Uses minimal material ✓ Markers can…
I really liked @ dbfrompw_852503's version as it is perfect for the small kits you get with dry erase boards. But we have a small board so I wanted to mount my holder to the wall. I removed the magnet spots and added two tabs for using…
I created this to solve things that frustrated me with existing holder designs. The box type take up too much whiteboard space, the trays are frustrating to use and have scratched folks more than once, not to mention bumping them creates…
A holder for Expo Dry Erase Markers. The holes for the chisel tip markers are large enough that you can put the markers in upside down, allowing the ink to saturate the tip. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA…
This thing is a wall mount for a Bissell Pet Stain Eraser (model 2054). Strangely, Bissell doesn't seem to have one available. Note: This version has small changes from the last one I printed. I added screwdriver access holes and fixed…
This is a remix of my Mass MTG Tokens design but instead of foil labels, these use a dry erase label. You will need some clear dry erase sticker sheets to create the label. I have included 4 different label templates you can use. Print…
This Cherry MX-compatible 2U Backspace keycap is disappointed in your typing mistakes! It's supposed to look like an old school (pink rubber) eraser but it won't look like that right off the printer... To solve that problem you have to…
A simple model to hold an Expo dry erase marker set including the markers, eraser, and cleaner -- or anything else that fits! Two stl's are provided: _V2 PUSH PIN - This version mounts via two standard push pins, which is what I've been…
Requires a bit of force to mount Use Supports on build plate CAD: https://cad.onshape.com/documents/5ba107f85dbf2a410cf25720/w/0fec43ad386a43c19f2120cf/e/2c120b52248bc3e970ff815d (not my neatest CAD, sorry! :P ) Leave a comment if you'd…
Simple toy version of 'Eraser Cat' from the game 'The Battle Cats'
A snap in clip to hold and store dry erase or liquid chalk markers. I use one on the fridge next to a black dry erase board. It works well for markers 0.64" (16.2mm) +/- in diameter. There are 8 sizes uploaded for holding different…
Stores 5 fine Expo Markers, Eraser, and Spray. Can sit at a table or be wall mounted. Prints in about 3.5 hours.
This organizer is perfect for any office, kitchen, or classroom Whiteboard. I also added a small tooth-like attachment on the front for a small rag so that you can clean your whiteboard occasionally. Not only is it able to mount on the…
I got tired of carrying my dry erase cards and round tokens in their original boxes, along with some markers. So I made this simple adaptation to the parametric rugged box (thank you for the awesome source). Here are the inside parts that…
A simple white-board pens, markers, eraser holder. It can hold up to four standard markers, one eraser. It snaps directly to the side of a whiteboard, and a smaller piece to reinforce it. You can apply soapy water to make it easier to…
STL Files for cosplay Eraser Head Goggles. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://a360.co/2sJKCQU Extra: 1 x 3/8 inch side buckle release. (Strapworks) 1 x 1 ft yellow flat nylon webbing 3/8…
I needed an eraser shield for a quick drafting project, but couldn't find one at home or nearby store, so I made one. I used pictures of most common eraser shield patterns online for reference. Default height is 0.4 mm, but You can resize…
A holder for dry erase markers to hang on top of little white boards. The white board I made this for is about 7mm thick.
This is a replacement cap for the Uni Kuru Toga eraser, in case someone misplaced it. The fit is quite precise, you will most likely need to tweak a few things, mostly X-Y Hole compensation. There are 3 variations : One with looser…
An adjustable holder for a Pentel eraser. Print with no supports in PLA or PETG. Assembly: Push the insert all the way to the bottom of the holder; make sure that it is flat along the bottom. Slide in your eraser. It should slot between…
Printed a few pencil holders and I wanted a tray for erasers and pencil sharpeners. It's made for three cats. Thinking about making a version for two…
This model is made to hold the Expo marker set (small diameter markers, eraser, and cleaner) as well as a few regular size dry erase markers. It is made to pair with the Honeycomb storage wall. Hopefully it will be of use to someone else…
This is a very simple container designed to hold dry erase markers. I attached mine to the wall using double-sided picture hanging foam. This will fill all standard "Expo" style whiteboard markers. The attached Gcode file is for the Prusa…
This is a super retractable eraser holder with a cap. It is suitable for erasers up to 21 mm wide and 10 mm thick. However, you can adjust it using grips. Glue is required to stick the 2 parts of the box together. I hope you like this…
I designed this compact marker holder. The 2 rows are different heights so that you can grab markers easily. The organizer is also angled toward the user for easier reach. Fits standard expo markers loosely, and fits Pentel markers…
hello! this is a simple model of a simple cat, eraser cat, from the battle cats! print with supports enabled and have fun with your cat army!
The felt pad has dimentions of roughly 300x50 mm with two 15 mm holes at the ends. It is best to mark them using already printed pieces. The magets you'll need are 6 of 5x5x5 mm neodymium cubes (that is just what I had lying around). To…
I've printed these with some generic PLA (white) and was able to churn out a half-dozen of them fairly quickly in the “upright” position, the same orientation as the close-up photos. I didn’t have enough "strong-enough" magnets to use…
This is a holder for the Magic Eraser (standard/smaller-size) with a single-axis swivel that can be attached to a standard broom handle or extendable handle for out-of-reach areas. It comes as 4 separate parts: Eraser holder Threaded…
Daughter got the Our Generation school and needed a dry erase eraser. I glued on gray felt using E6000. Wait at least 24 hours for glue to set. Use this glue and of course heat your PLA in a well ventilated area. Follow instructions for…
Attached by sliding onto the aluminum extrusion - the particular brand is Master of Boards. Holds markers of 3 different sizes and a dry eraser vB has a deeper cup for the eraser. vA uses less material ~ thus less print time. The smaller…
**UPDATE** I didn't like the way it turned out the first time and I've learned a lot about Fusion design since then. Also removed the “cutouts” in the back for magnet placement… now you can add a “Negative” form to the back to fit your…
Simple but effective holder for dry erase markers, eraser, and spray cleaning bottle. I used adhesive velcro to stick it to my board. I used 10% infill, but it's a matter of preference. No supports, of course.
Bissell pet hair eraser charging station. Print instructions Category: Tool Holders & Boxes Summary Bissell pet hair eraser charging station. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: No </div>…
This is a magnetic caddy made to fit two chisel-tip Expo makers. It's perfect for metal whiteboards or refrigerators! The openings will fit markers a little larger than the original Expos, so they should be compatible with other brands as…
My solution to my own problem. Figured I would share it. I hated the tiny eraser that came with my beloved P209 pencils and I hated the metal cap that I would constantly have to remove and was always afraid of losing. It press fits into…
STL Files for cosplay Eraser Head Belt. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://a360.co/2t10jDo Extra: 1 x 2 inch side buckle release. (Strapworks) 1 x 2 ft black flat nylon webbing 2 Inch.…
This fits 12 Expo fine tip markers as well as the Expo eraser . Prints with no supports, I used 15% infill.
I received a request for two more cookie cutters from the anime "My Hero Academia", this time it is Present Mic and Eraserhead (Hizashi Yamada and Shota Aizawa). Based on some very nice fan art, here they are. As always, I am including a…
DRY ERASE MARKER HOLDER WITH MAGNET HOLE ON BACK )1.1"X2.71" HOLE. FIT ½" DIAMETER DRY ERASE MARKERS.
Print with PLA, PETG, or the filament/resin of your choice Infill can be from 20 to 100 % as the walls are thin Conviently snaps onto stand There are two versions: one for the thin part of music stand, another for the thick. Choose wisely!
A simple and clean holder for your dry erase board markers and holders that doesn't ruin the look of your modern glass dry erase board. 👌 The model should be printed upside-down with no supports. The cavities for the markers and the…
This is a simple design mostly for glass whiteboards that utilizes suction cups to keep it in place. Print with the back side facing down at a 45° angle. There is a magnetic version that contains captive magnets to be able to use on a…
You can use 3M adhesive/velcro strips or something equivalent to adhere to white board.
I needed a simple mount to hold a generic dry erase board up on the wall, but wanted to be able to remove the board if necessary. Has a screw hole for secure mounting, but command strips or double-sided tape should also work. Used ABS for…
Needed a simple holder for a whiteboard, so I designed this one
For use in a double rowed cubicle hook. .5" tall hooks. 3 per side, 2 sides per hook. should hold a lot of weight
Just a simple, magnetic, Dry Erase Pen holder to organize dry erase pens on a small white board. Uses two 9mm Neodynium magnets from Home Depot super glued into the mount to stick to any magnetic white board. The white board I use has a…
I made this so I wouldn't have to search for the marker every time I wanted to jot something down. Just holds one dry erase marker. Clips to the edge of a bare whiteboard. Mine is about 3mm thick.
A bolt action pen with a Frixion eraser. Includes original pen cap. If you want you should be able to use a 3m screw instead of the printed bolt. Takes Pilot Frixion cartridges, although you can also use any G2 sized cartridge. Printing…
Magnetic Whiteboard Markers & Eraser Organizer for Expo or similar markers. On the back it has 6 recessions to put 15mm-diameter magnets. You can use superglue or hot glue to attach them.
I designed this whiteboard marker holder when I couldn't find one that served my purposes and that I liked while being easy to print with minimal waste. The holder is designed to hold 4 Expo style whiteboard markers (20mm diameter) and…
Designed to perfectly fit an amazon basics dry erase cleaner bottle.
Strong Magnetic Dry erase Holder Uses two 2x 60mmx5mmx10mm neodymium magnet. Very strong
Simple tokens for use with dry erase playing cards.
Customized version of https://www.thingiverse.com/thing:340178 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=340178 Instructions Using the following options: markers = 10 height = 50 thickness = 3…
Inspired by aircraft models, making it easier to access pens, dry erase markers, and dry eraser when needed
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This pencil case was specifically designed for three of my…
In the software world, efficiency comes in the form of saving the user clicks; In the physical product world, efficiency comes in the form of saving the user actions . When it comes to work, I strive to be as efficient as possible.…
I created a mounting hook that adapts the OEM supplied wall mount brackets of a Skilcraft Quartet Dry Erase Board to hang over a cubicle wall. This model might work with other dry erase boards. I made multiple mounting positions for…
Pretty basic, just a cap for the fine tip Expo dry erase marker. Print at 0.20mm layer height.
I thought an eraser could work well as a rubber tip but it didn't turn out as well as I'd hoped. This uses an eraser from a Ticonderoga NO.2 Pencil. Cut it from the base with a razor and slot it into the performance tip. make sure you…
Not the most material-efficient HSW marker holder, but it suited my needs for the amount of markers I had. Print upright, and use supports. This piece uses the hollow insert you can find in the original printable's files. Marker Holder…
Gridfinity 1x2 bin that holds up to four Pentel Hi-Polymer Erasers w/ sleeves. Print looks bad, was testing something, should not look like that for you.
Needed one a little smaller than TJBLACKFORD's Dry Erase Marker & Eraser Holder ( https://www.thingiverse.com/thing:3097782 ). Also added magnet holes (…
While browsing printables I found a few neat designs for magnetic dry erase marker organizers, but none that fit my exact needs. I decided to try and put something together in Onshape that matched both my requirements and my available…
The fine tip Quartet markers are a bit thinner than the standard markers. This unit is designed to go on a wall with two sided tape, markers clip into position and are easy to pull out and put back. Print in PET to reduce creep and…
This holder can keep up to 5 skinny dry erase markers and one dry eraser organized to your heart's content. Use command strips to mount it next to your whiteboard of choice! Also, be sure to mount it so the markers are horizontal, as this…
Quick and easy Gridfinity Holder for 2 Erasers and a Pencil Sharpener :)
Mr Clean Magic Eraser Holder for Sawzall I created this model because I needed a way to hold a Mr. Clean Magic Eraser with a Sawzall so I could use it to scrub the siding on my house. This design modifies an off the shelf tool you can buy…
Simple holder for a dry eraser and 3 pens. Option for magnetic mounting (push in qty.4 of 8x3mm magnets in the back) or screw mounting. Also see: https://www.printables.com/model/1161292-whiteboard-magnetic-card-holder
A simple caddy that holds 4 Expo sized dry erase whiteboard markers, a white board cleaner spray bottle, and a felt marker. I simply attached the caddy to the wall with dual-lock. The markers fit loosely upright or upside down.
At my work we use dry erase markers to write stuff on a board. I didn't like any of the other designs on here because they all kept the tip pointing up. This causes the fluid inside to move away from the tip and make it "dry out". I…
I was tired of leaning back and bumping in to my dry erase board behind my chair and knocking off the eraser or marker so I created this simple wall mounted holder that is really easy to install. It holds to markers and 1 eraser. The…
remix just changed the magnet pockets in the back for some 8x4 magnets i had laying arround
Just a simple pencil case I made once my old one broke down
