seat post shim adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shim to convert a 27.2 mm seatpost to a 30.4 mm bike tube
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a seatpost shim adapter I created to make my 27.2mm seat post fit into my tencays CGO 600 Pro bike with a 30.4mm tube. The adapter is 100 mm tall so that the seatpost does not wiggle.
I had to adapt the tolerances a bit (0.10mm wider on the outside, 0.18mm wider on the inside) to make it fict snugly, but not too tight. If you need any other size, let me know and I can creata a model.
The top has a small lip so that it does not fall into the tube. The lower end of the tube has 3 slits to accomodate for movement due to compression. The top and bottom are chamfered for easier insertion.
As this is a plastic part, I would not recommend to use it for a prolonged time, only as a stopgap until you have ordered a carbon / aluminium part.