Textured Short Vertical Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picatinny vertical grip for use on rails or with custom attachments, such as to paint miniatures.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 613
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Awhile ago I started to get into painting mini characters for DnD, and couldn't find a holder tool I liked, then started using an old grip from airsoft with some blue tak putty attached to it and it worked pretty well. I wanted more but didn't want to spend money on them so I modeled a close representation to what I had already, and it turned out pretty good.
This uses 2 each of an M5x30mm screw and M5 nut. Depending on how accurate your printer is, the nut may be a press fit. I found that this was actually nice, though not intended.
This can mount to a proper rail system, however real grips are made from more durable material and have had much more testing involved. Use this at your own risk if using it on a real firearm. (Just go buy a real grip)
This would work very well for props, airsoft and Nerf, however.