1 / 2
Cassette Tool Thru Axle Guide Pin Spacer from 5 to 12 mm — zdjęcie 1
1 / 2

Cassette Tool Thru Axle Guide Pin Spacer from 5 to 12 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guide for the pin of cheap Chinese cassette tools. Converts the pin from quick release to 12mm thru axle.

Ocena
0 / 5
Polubienia
3
Pobrania
31
Wydruki
0
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed something to guide my cheap cassette tool from AliExpress, but my new wheels have Thru Axles instead of Quick Release. So I went to Tinkercad and made a guidetube with the right dimensions.

Holes in prints tend to shrink, so even though I made the hole slightly bigger than the 5mm pin, it was too narrow to fit, so I just took a 5 mm drill bit and cleaned the hole. 
Now it fits snug enough to hold, but it's still removable without too much hassle.
 

I printed mine in PLA on fast settings (0.28mm) with an extra wall to make it stronger. I added a little brim just to make sure it sticks to the buildplate.
The metal pin makes it strong enough to print standing.

Tagi