bed_powercable bracket - remix of Staffa laterale ferma cavi Sunlu S8 by frankyf71
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like frankyf71 L-Bracket to keep the cabling to the heated bed out of snagging distance of the Y-motor, which…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really like frankyf71 L-Bracket to keep the cabling to the heated bed out of snagging distance of the Y-motor, which I saw quite often with my ender 3 pro.
The bracket works on pretty much everything which uses a 2020/4040 or similar extrusion bars. You need M5 screws and the typical nuts for the 2020/4040 bar. If you don't have some by hand, there is a nice alternative https://www.thingiverse.com/thing:3050607 by DaVinci2000 .
The original one was made for cylindric inbus/allen key screws. I made the whole slightly larger to use pan head screws (Linsenkopfschrauben) as well.
V2 Update:
I shifted the screw holes 10mm to the right. This allows to use the bracket exactly into the corner of the printer.
Also, I added the STEP file and Fusion360 archive for easy remixing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.20
Infill:
20%
Filament:
OWL Filament PLA White
Category: 3D Printer Parts