Fully printed PTFE tube connector with M3 attachment hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple 4mm PTFE / teflon tube connector with an attachment hole for an M3 screw.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the very good PTFE connector by Honzal. This connector does not need any additional materials except for two bits of 1,75mm filament to secure the PTFE tubes. The holes for this securing filament are very tight, I recommend using pliers to push the filament in or expanding the holes a little with a 1,8mm drill.
The tube interface is smoother than any other connector I've tried, including the Bambu original one. It is almost guaranteed that your filament won't get stuck in this connector.
I have added hole for M3 screws that allows you to attach this connector to any 3mm hole, which are quite standard on most printers.
Happy printing.