1 / 2
Laptop Stand for 13-15inch - Snapfit or with tools — zdjęcie 1
1 / 2

Laptop Stand for 13-15inch - Snapfit or with tools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple Laptop Stand for 13 to 15 inch Laptops. Two versions, one is snapfit the other with heatinserts and screws.

Ocena
4,833 / 5
Polubienia
32
Pobrania
450
Wydruki
6
Wyświetlenia
1509
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Simple Laptop Stand for 13 to 15 inch Laptops. Two Versions, one is snapfit the other with heatinserts and screws.

Both versions are rigid, therefore the tolerances are quite tight! If you don't calibrate your filaments, don't think about the snapfit version!

The tolerances are for PLA filament.

Print settings: (tolerances are tested with these settings!)

  • 3 Perimeters/Walls
  • 5 Bottom/Top layers
  • 25% infill
  • 0.2mm layer height
  • Supports: Only for Connector of non-snap fit version

Tools for non-snapfit version:

  • 2x 3x5x4mm heatinsert
  • 2x 3x8mm screw

Please leave a like and show us your make! =)

Tagi