1 / 2
5015 K1 Silent Fan Shroud Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this allows you to use a 5015 fan instead of the stock part cooling fan.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 291
- Wydruki
- 1
- Wyświetlenia
- 3124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (77)Powiązane
5015 blower fan shroud for K1 and K1 max
way quieter than the stock fan, 100% sounds like stock's 20%
I didn't use heat inserts like the original, I used bolts and nuts instead
I originally printed mine in PLA+ but it got a bit warped from the heat so I reprinted with the bottom duct part in PC, then the top in PLA+ (see first model pic)
I'd suggest PETG, PC, ASA or ABS
V2 has the front covered up with holes in it, and the fan installation is a bit easier and more secure.