Traxxas TRX4 Front Axle Shock Link Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement - very strong. Pls verify and upload your makes!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 818
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: V2 now is printable with PC and Nylon CF with snug supports.
--
19.03.2024 Updated Model and Print Settings
Prints upright with no supports with Nyolon6-CF filament.
See the included 3mf with variable layer heights for faster printing and custon temperature change for the uppermost part (did not get hard while printing with the higher temp and created a nice poo poo).
Older Version snapped off after a… 1,5m fall.
---
I itereated several materials
PLA: too brittle
PETG: too weak
Polycarbonate: abolutely unprintable without second extruder for supports and measures were totally off.
I stick to extrudr Greentech Pro Carbon Fibre - 0,15mm with a 0.6mm nozzle.
Part is strong, stiff, tried to break it with no success.
Little diss to the guy who sells a similar STL for 15€ on cults3d - would have bought yours if it was 3-5€ - so I had to do it myself, learned even more about Fusion360 and now give it away for free.