Traxxas TRX4 Front Axle Shock Link Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement - very strong. Pls verify and upload your makes!
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 98
- Makes
- 2
- Views
- 819
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Update: V2 now is printable with PC and Nylon CF with snug supports.
--
19.03.2024 Updated Model and Print Settings
Prints upright with no supports with Nyolon6-CF filament.
See the included 3mf with variable layer heights for faster printing and custon temperature change for the uppermost part (did not get hard while printing with the higher temp and created a nice poo poo).
Older Version snapped off after a… 1,5m fall.
---
I itereated several materials
PLA: too brittle
PETG: too weak
Polycarbonate: abolutely unprintable without second extruder for supports and measures were totally off.
I stick to extrudr Greentech Pro Carbon Fibre - 0,15mm with a 0.6mm nozzle.
Part is strong, stiff, tried to break it with no success.
Little diss to the guy who sells a similar STL for 15€ on cults3d - would have bought yours if it was 3-5€ - so I had to do it myself, learned even more about Fusion360 and now give it away for free.