1 / 1
Canon 10x30 IS Eyepiece Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Captive ocular lens caps for the Cannon 10x30 IS binocular
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I tried to strike a good balance between secure fit and ease of attachment. Don't hesitate to scale up and down slightly for personal preference. Half a millimeter makes a big difference. I used PLA+ but almost any material should work fine.
To print this model, it is important to configure PrusaSlicer as follows:
0.2 mm layer height
3 perimeters
0.45 mm extrusion width
no infill
no top layers
7 bottom solid layers