TS100 Rugged waterproof box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TS100 case
- Ocena
- 0 / 5
- Polubienia
- 316
- Pobrania
- 333
- Wydruki
- 2
- Wyświetlenia
- 7996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model
I designed this case to carry both the Miniware TS100 and its accessories, including the battery.
The box is divided into 2 levels, the lower one can accommodate ESD tweezers, a solder holder, the 50cm cable and space for adapters and other small parts.
In the upper part you can house the Ts100, 2 extra tips, 1 Allen key, 1 solder wick holder, the miniware t-stand. The battery takes up space on both layers.
The box is based on this design.
Printing
I printed all the parts in PLA excluding the seal which is printed in TPU. I personally used TPU with shore 87A.
(optional)
The top part needs to be printed in multi filament, I printed it with bambulab and AMS but I know there are other ways to print things like this.
Additional parts
8x M3x25mm Screws
(Optional 8x M3 Nuts)
On the lid of the box you need to put a piece of foam to hold everything in place and avoid scratches on the display or other parts.