FormD T1 2.5 Low Noise Fan Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I changed the spacing of the part, so it fits the FormD T1 V2.5. The side struts are 4mm with this case instead of 3,5mm with the FormD T1 V2.1.
The original part had exactly 4mm of spacing, but due to tolerances of your 3D printer or ABS/ASA shrinkage, this might not be enough, It wasn't for me at least with Extrudr DuraPro ASA.
Other than that, @Greymanx' original description still applies.
The quiet set of fan brackets feature a cutout to remove the portion of the fan brackets that obstruct the fan inlet causing noise and turbulence, reducing the airflow efficiency. Due to the design, it limits the possible positions of the exhaust fans. This limited positioning is more than made up for by the noise reduction and improved airflow.