Static Discharge Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount a Static Electricity Discharge Terminal.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I live in Denver where it is very dry in the winter (<20% RH). I grew tired of discharging static through the printer and resetting it. This was particularly frustrating when it happened mid-print while changing filament colors. So I purchased a simple grounding wire from Amazon that plugs into a standard 3-prong outlet and has a banana plug on the other end. I secured the banana plug in the bracket and mounted it to the underside of the printing table with two 3M Command strips. I now touch the plug before touching the printer. Better a small shock than a failed print!
The hole is the bracket is a force fit around the banana plug. You will need to use a flat blade screwdriver to open the slot enough to get plug into the hole.
The wire set from Amazon: https://www.amazon.com/dp/B091CGGP3Y?psc=1&ref=ppx_yo2ov_dt_b_product_details
Please post Like & Makes if you like the design. Thanks!