FTC Centerstage GoBilda Viper Slide Angle Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angle support bracket for the cable driven GoBilda viper slides for FTC Centerstage Backdrop scoring
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 863
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are the supports for the GoBilda Viper Slides for FTC Robotics for the 2023-2024 Season. This was designed for our 7th grade teams to assemble and learn the advantages of 3D printing. These supports will allow you to mount the GoBilda Viper Slides at the same angle as the backdrops allowing you to score higher on the board. For the full assembly you will need:
1x Left side brace
1x Right side brace
2x Lower Support Brace
Some extra GoBilda hardware will be needed for mounting to the frame and slides. These should all print without support, just make sure your first layer is calibrated well and you should be able to do them all on one plate without supports.
You can check my profile for the other parts for out 7th grade teaching bots, and check the onshape link to view the cad of the completed robot.