APS CRS M4 - battery cover replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement battery cover for the APS CRS (Collapsible Rifle Stock) M4.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 198
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi!
This is a replacement battery cover for the APS CRS (Collapsible Rifle Stock) M4. The Cover will snap into the Stocktube on one end, the other end functions as a joint for opening/closing.
The bolt and nut do work, but they're to be seen as temporary fix, especially the nut is so delicate that I can't guarantee it will hold up very long. After printing, you should take a steel M4 Screw and Nut and CAREFULLY screw them into/onto the printed parts to give the printed threads a better shape and make them work properly.
Print the battery cover standing with paint on supports as shown in the picture. you do not need to, but I advise you to also support the upper part to give the print some stability during printing.